Pitina. A remarkable Italian Salami originating in the Dolomite valleys of Tramonti di Sopra, Tramonti di Sotto, and the River Cellina, in the northeastern Italian province of Pordenone in Friuli. This dry cured meat is not your typical salami. It’s actually more like a meatball than a salami.
Pitina was a salami born out of necessity, mainly to preserve game and because there was very little equipment needed to make pitina, this charcuterie became widely available to most homes.
Today I’m going to take you through the process of how we make pitina. Unlike the poriginators of this charcuterie we do use a few modern conveniences to make this salami. Things like a grinder and a ph meter come in very handy for quick processing and reliable results. If you don’t have a grinder you can make this “old school” by mincing you meat and fat finely with a sharp knife. The results will be the same😀.
Today we will be using a few unique ingredients in this recipe. These ingredients are in the recipe to ensure that you produce a safe product. The first is Insta Cure #1. We use Insta Cure #1 to protect our meat against harmful bacteria (botulism). We are using Insta cure #1 is in the recipe because the total time it will take for this salami to be finished will be 30 days or less (You would use Insta cure #2 for projects that take longer than 30 days to make). Another unique ingredient is dextrose. Salami is a fermented sausage and in order to ferment a sausage you will need bacteria. The product we will be adding is called Flavor of Italy and it’s a starter culture for fermenting meat. It contains all of the necessary bacteria to safely and effectively ferment our sausage. Finally dextrose is a simple sugar that is used to feed the bacteria in our salami.
Let me break down the starter culture for you a little more. Flavor of Italy contains several different family groups of lactic acid producing bacteria (much like sauerkraut or pickles). Under the right conditions, these bacteria eat the added sugar (dextrose) and release lactic acid. It’s this very process that starts to acidify your meat, lowering the pH. When it comes to salami making the “safe zone” is a pH that’s under 5.3. Each start culture is slightly different but for Flavor of Italy our target ph will be between 5.2pH and 4.9pH.
The absolute most reliable way to test the pH of your salami is with a pH meter. If you plan on getting into this hobby you’ll want to get a reliable pH meter. This isn’t something that you want to go cheap on. A good quality pH meter will last you a long time and offer you the peace of mind of knowing that you are producing a safe product to eat. We use the pH meter from Apera Instruments PH60S-Z. This Pocket pH Tester has blue tooth capability, can be calibrated for extreme accuracy, and is very easy to use. They also make a (non bluetooth version) PH60S. The great thing about pH meters is that you can use them for all sorts of things other than salami making. We use ours to make beer/wine, cheese, fermented foods (kim chi, sauerkraut, hot sauce), kombucha, and gardening/hydroponics. There are many different styles of pH meters but if you stick to the ones that I linked above (the swiss spear units) you can do everything i mentioned without a problem.
The last thing and quite possibly the most important thing you need in order to make this salami is a place for it to dry. Salami is often hung in basements or cellars as the temperature is typically cool with a fairly high humidity. If you have a basement or cellar that’s not very drafty and has an average of 55F (13C) with a high humidity (80%) then you can place this salami in there with no worries, but for the rest of us, the best option is to have a drying chamber. A drying chamber provides a controlled environment so that your salami can dry evenly. Building a drying chamber is relatively easy but if you don’t want to build one and have some rainy day money laying around buying a drying/curing chamber is even easier.
Follow basic salami preparation practices when making this sausage.
- Clean and Sanitize all of your equipment.
- Keep your meat and grinder parts super cold (below 35F) during the grinding process
- Rehydrate your starter culture (in non-chlorinated water) for 30 minutes prior to use.
- Mix your very chilled mince meat, seasonings, and starter culture till the mince becomes very tacky
- Record the starting weight and the target of each salami link
- Allow the salami to ferment for 18-24 hours (these parameters are for Flavor of Italy starter culture)
- After the pH target has been hit, cold smoke this salami for 2 hours then place it in an area to dry till the weight loss target has been achieved.
- Remove from the drying chamber, slice thinly, and enjoy
Here are a few things you might find useful when making this salami
- Iodophor Sanitizer
- Digital Smokers (I use the model 4D WiFi)
- Bella’s Cold Smoke Generator
- MK4 Thermapen (Accurate Thermometer)
- Sausage Pricker
- Dry Curing Cabinet
- Kotai Chef Knife (for 15% off use discount code – 2guys )
- Sausage Stuffers
- Meat Grinder
- Meat Mixers
- Stuffing Horn Cleaner
- Butcher Twine & Dispenser
- Small accurate Scale for spices
- Large Capacity Scale (33 pounds)
- Drying rack and tray
- Custom Cutting Board
- Apera pH Meter with Bluetooth
- InkBird Controllers temp & Humidity
- Dehumidifier Eva Dry 1100
- Cool Mist Ultrasonic Humidifier
- Heavy Duty Kitchen Vacuum Sealer
How do you store your salami when it’s finished
Storing your salami properly is just about as important as making your salami. You’ve spent so much time patiently waiting for your salami to dry properly the last thing you want is to have it ruined by storing it incorrectly. In all my years of salami making the advice I’m about to give is from personal experience.
I have found that the best way to store your salami is by vacuum sealing it then placing it in your refrigerator till you are ready to eat. This method will keep your salami in “stasis” for as long as a year! By vacuum sealing your salami will keep it from losing any more moisture and as an added bonus the time it remains in the refrigerator will help equalize the moisture that inside and allow the salami to “age” which will develop its flavor. It’s a win win!
Can you freeze your salami? Technically you can and many people do BUT freezing your charcuterie (salami or whole muscles) will affect the texture when it’s thawed and eaten. As the salami thaws moisture crystals (that were frozen) will be released changing the overall texture. I don’t personally recommend freezing but if you don’t mind the texture change it is certainly an option. If you are looking for an affordable vacuum sealer, consider checking out the Heavy Duty Kitchen Vacuum Sealer from the Sausage Maker. This vacuum sealer is versatile and really does a good job. It has lots of features and really makes a tight seal on your meats (which is what you want). A more economical option for more short-term storage is this Hand Held Vacuum Sealer with Zip Lock Bags also from The Sausage Maker. This is a great option for fast convenient vacuum sealing especially if you plan on taking slices off your salami frequently. This option allows you to use a small handheld sealer with special bags that can be reused time and time again.
The only thing you need to remember about vacuum sealing your salami is that all of the exterior mold coverage needs to be removed. Mold needs oxygen to survive and the moment you vacuum seal a salami with mold on it, the mold will begin to die and turn slimy. To remove the mold just wash the outside of your salami with vinegar. That should take care of it.
Enjoy the video and the recipe. If you have any questions, feel free to ask away. If you make this at home, I’d love to hear about how it came out!!
If you want to see the different things that we use in operation our be sure to check out our new Amazon Store.